離心分離式干澀機

◆廠品優點 Product features

※極具穩定可靠高度的吸氣經濟壓力和露點

1.吸附物塔之位置與口徑經實驗室數據五金機械計算的，塔床摩擦阻力小，切實保障了壓縮的空氣缺水劑5秒的觸及時長，能夠滿足的成品氣的露點要。

2.30％的烘干劑空間，使用賠償金烘干劑的肯定光老化，為了確保烘干。

3.大蔓延器，保證 氣團不規則在干澀劑層，解決溝流這種現象。

※可再生氣量耗損小于等于14％

1.桌越的機筒制定，儲存100％的降解糖份，補充的糖份適用加入回收實力階段中的回收實力氣高溫，提高自己機器設備的解吸實力，令回收實力更恢復原狀。

2.吹干和重復利用所采用交叉煙囪效應方案格式，濕室內空氣流進干的活性炭吸附劑實效果最佳。重復利用氣出口值含濕量掌控在亞飽和感覺，使res排氣消音器器及res排氣短信通道無返潮之慮。

3.可可根據非常干燥機的運作負債使用需求調低降解氣儲電量，確保安全降解空氣陸續平衡，降解負壓低至臨界值。

※空氣干燥劑選擇時間長

1.比較好的機筒長寬高，使氣體實現晾干劑層的空氣流速和時長保持著好的程序，加以產生晾干劑的使用性能。

2.科學的系統顯卡配置，在環流來到機筒前，經除油加工處理迅速清楚環流中內油份物與重環境工業廢氣，杜絕干澡劑層受環境生態破壞。

※機器按照了有趣高品級智能及重新閥和信得過的全電子元器件可程序編寫序管理器，人機對戰網頁和諧，重新連續性顯視雙塔工程狀況，再循環的周期環境可編，在出廠調節10min。的閥門使用期限過去了50萬次動作。

※筒節表面作冷鍍鋅管防銹蝕加工處理，10年不生繡。

※拉伸動作精準、的性能可靠、操作的便捷，裝不需要條件。

※Bend it out on the same has the stable pressure and dew point

1. The height and diameter adsorption tower by the experimental results calculated precisely, tower, ensure the small resistance bed compressed gas desiccant 5 seconds contact time, meet the requirements of the finished product angry dew point.

2.30% of the surplus, desiccant used to compensate for the natural aging, ensure desiccant dry.

3. Large diffuser, ensure uniform through the desiccant air layer, eliminate channel flow phenomenon.

※Bend the gas loss less than 14% renewable

1. Excellent barrel design, save 100% of the adsorption quantity of heat, storage quantity of heat is used to increase the regeneration stage again angry temperature, improve equipment desorption ability, make renewable more thoroughly.

2. Dry and regeneration of the reverse convection scheme, wet air through the dry when the adsorbent best effect. Getting angry export moisture content control in the saturated state, the muffler and exhaust passage without concentrations of condensation.

3. According to the operation of the dryer load demand adjust dosage, ensure again angry for stability, regeneration renewable air pressure low to critical.

※Bend desiccant long service life

1. The right of barrel size, make the gas through the desiccant flow velocity and time of layer be the best, give full play to the desiccant performance.

2. The reasonable system configuration, in the air into the barrel, except by the efficient before oil processing timely removal in the air in content and heavy oil pollutant, avoid desiccant layer contamination.

※The equipment adopts bend novel high quality and pneumatic valve electric and advanced and reliable full electronic programmable controller, friendly interface, automatic continuous display of the twin towers, working cycle, the programmable factory set 10 min. The valve life for 500000 times action.

※Bend the cylinder body wall be cold galvanizing antirust processing, 10 years don't rust.

※Bend action, stable performance, accurate, easy operation and installation with no need of foundation.

◆首要技能參數值 Main technical parameters